Skip to end of banner
Go to start of banner

Complete Cabling

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Current »

SCW expects you to know and follow both industry best practices and all requirements of the applicable AHJ (Authority Having Jurisdiction). This means you will:

  • Use best practices to route, support, and protect cabling
  • Leave service loops (minimum 24-inch required)
  • Label cables
  • Use the correct cable type for each section of the site (Riser, Plenum, Outdoor/ Direct Burial)
  • Use conduit where appropriate in accordance with the project bid, industry best-practice and codes

  • No labels