...
- Install the NVR in the agreed up on space
This may be a Shelf, Network Cabinet, Server Rack, Vertical Wall Mount, etc. Refer to your SCW document for guidance if you’re unsure. - Connect the NVR to the client network
Client will verify a router/ switch port that they will want the NVR connected to. If that router/ switch port is in a different location than where the NVR is mounted, complete the cable-run from the NVR to that location. - Connect your laptop to the same network as the NVR
- Call SCW Technical Support at (828) 352565-22421205
Let SCW know you are completing an installation for our Project Management Team. They may ask you to provide the WO# and/or site address. They may also remote into your laptop. - Have Tech support walk you through the steps of adding a camera to the NVR.
This will ensure that you’re able to smoothly add and aim cameras as you install them throughout the project. - Have Tech Support take you to the QR Code Page for adding the NVR to the Software via P2P
A photo of the QR Code will need to be uploaded to the work order for the installation to be considered complete.
...